[3dem] TFS Room temp Holder clipping loose

[Ruben Diaz]

Hi Bob,

This is a common problem with our holder, but it is easily correctible with
some pointed pliers to bend the wires that connect the clamping mechanism
to the holder. All you need is some decisiveness, as these things can smell
the fear and then the ring at the tip ends up flying and resting at the
most inaccessible corner under the microscope (invariably). Good luck!

Ruben.


On Tue, Apr 18, 2023 at 8:54 AM Grassucci, Robert <rg2502 at cumc.columbia.edu>
wrote:

> Hi All,
> We have a standard room temperature holder for our TFS Spirit with a fly
> swatter type grid clamping system.  The grid seems loose and slides
> around.  Have any of you experienced this and were able to make an
> adjustment to the clamping force?  I figured I would be best to ask before
> I try bending the clamp and break it😉. Thank you in advance.
> Bob
> _______________________________________________
> 3dem mailing list
> 3dem at ncmir.ucsd.edu
> https://mail.ncmir.ucsd.edu/mailman/listinfo/3dem
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.ncmir.ucsd.edu/pipermail/3dem/attachments/20230418/e1796752/attachment.html>