[3dem] Rapidly deteriorating SIP pump on JEOL 2200-FS with use of cryo-holder
Jaap Brink
jbrink at jeol.com
Thu Jun 20 20:23:27 PDT 2019
Hi Qiaohui,
In case you have a SVC contract I would recommend contacting your local SVC office. Offhand this doesn’t seem right. Typically a new SIP can last for 7-8 years when handled properly, something you seem to do.
Good luck.
Jaap Brink
On Jun 20, 2019, at 10:16 PM, Qiaohui Yang <qiaohui.yang at ymail.com<mailto:qiaohui.yang at ymail.com>> wrote:
Dear 3DEM members,
we have a JEOL 2200-FS TEM running at 200kv which we very occasionally will use to do some cryo-TEM work (once or twice every few months).
After every session, I would routinely do a round of ACD bake out and at the end of every month, I would do a round of column bake-out for 2-3 days to try to maintain the performance of the SIP pump. But recently, after installation of a new SIP pump about a year ago, we found that the SIP pump has started to deteriorate and not recover the next day, even after viewing room temperature samples.
I was wondering if anyone has encountered a similar problem and if there would be any tips/advice to get around it.
Thanks!
Best regards,
Qiaohui
_______________________________________________
3dem mailing list
3dem at ncmir.ucsd.edu<mailto:3dem at ncmir.ucsd.edu>
https://mail.ncmir.ucsd.edu/mailman/listinfo/3dem
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.ncmir.ucsd.edu/pipermail/3dem/attachments/20190621/7f10016b/attachment.html>
More information about the 3dem
mailing list