<div dir="ltr"><div dir="ltr"><div>Hi all,</div><div><br></div><div>We are troubleshooting an issue where our glow discharger(s) seem to be of variable efficiency (sometimes making carbon grids appropriately hydrophilic, sometimes less so, occasionally not at all). My current theory is that the ambient humidity of the room is affecting the efficiency of the glow discharge. Has anyone encountered this or looked into it more thoroughly, and if so, what was your fix (account for humidity in timing / current? move the glow discharger into a more humidity-controlled room? desiccate the air going back into the chamber... somehow?). Other variables that have been ruled out are a faulty glow discharger, location of grid in the metal block, and whether it is the first glow of the day / session. </div><div><br></div>We regularly have >50% humidity in the room during the summer, even with the dehumidifier running at full speed, because of air flow etc. variables in the room that we cannot change. We have two glow dischargers, a Pelco Easiglo and a Quorum/EMS GloQube, and have seen this with both dischargers, although we use the GloQube more so we have seen it more with that. At one point I tried to blow all the carbon off a grid with a very prolonged (5 min @ 20 mA) glow discharge on the GloQube, and all the carbon was still entirely intact, which made me a bit nervous. <br><div><br></div><div>Relatedly, how often and how do you all clean your metal blocks that grids glow discharge on? We were thinking of using acetone and/or alcohol, but would appreciate recommendations!</div><div><br></div><div>Talya Levitz, PhD</div><div>Scientist I</div><div><a href="mailto:talya_levitz@dfci.harvard.edu" target="_blank">talya_levitz@dfci.harvard.edu</a></div><div>Pronouns: they/she</div></div>
</div>