<div dir="ltr">Actually in my case it's the first case, the one with the thread, but not the two feet. I just checked under an optical microscope and see the ring and spring that holds the ring all look ok. However, I do see a problem at least in my case: the autogrids slide freely under the clip ring---so expect some drift issue. I can think of two solutions:<div>1. a washer at the right size. This will make the autogrid+washer bigger and bigger, but should be ok.</div><div>2. file the clip ring precisely so that the clip ring can go in the "normal" way (you can't push it in the normal way without making it shorter) and in the meantime hold the autogrid firmly. </div><div><br></div><div>Haifeng</div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Wed, Jun 26, 2019 at 12:07 PM Sharon G  Wolf <<a href="mailto:Sharon.Wolf@weizmann.ac.il" target="_blank">Sharon.Wolf@weizmann.ac.il</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">



<div dir="auto">
<div style="direction:ltr">David </div>
<div style="direction:ltr">In our case it is the second type with the “feet” tool. That corresponds to the “626-70” holder. In the first case ( the tool with the threaded end) it’s the 626-60 holder. We have one of the 626-60 holders too,  but did this successful
  test with the 626-70 holder only.</div>
<div style="direction:ltr">Sharon</div>
<br>
<div id="gmail-m_5148007033696049410gmail-m_-5647363986938848351AppleMailSignature" dir="ltr">Sent from my iPhone</div>
<div dir="ltr"><br>
On 26 Jun 2019, at 19:01, David Michael Belnap <<a href="mailto:David.Belnap@utah.edu" target="_blank">David.Belnap@utah.edu</a>> wrote:<br>
<br>
</div>
<blockquote type="cite">
<div dir="ltr">Michael and Haifeng,
<div><br>
</div>
<div>What type of the 626 holder are you using?</div>
<div><br>
</div>
<div>-One type has phosphor bronze clip ring that appears a bit slanted on the side that faces the grid.  The inside of the clip ring has threads.  The tool used to put them in place and remove them is a rod with a blunt end and a threaded end.</div>
<div><br>
</div>
<div>-The other type uses Be clip rings that are more flat.  The clip rings resemble the Krios clip rings in that the Be ring has a raised portion on the outer diameter.  The tool used to insert and remove them has small “feet” that the user spreads
 out to about 180 degrees to hook against the clip ring to manipulate it.</div>
<div><br>
</div>
<div>Thanks.</div>
<div><br>
</div>
<div>David</div>
<div><br>
</div>
<div><br>
<div>
<blockquote type="cite">
<div>On Jun 25, 2019, at 3:18 PM, Haifeng He <<a href="mailto:haifenghe@gmail.com" target="_blank">haifenghe@gmail.com</a>> wrote:</div>
<br class="gmail-m_5148007033696049410gmail-m_-5647363986938848351Apple-interchange-newline">
<div>
<div dir="ltr">I just tried what you said in the loading station only and it worked! The shutter also closes nicely. Great idea! Will still need to see if the drift rate is affected at Cryo temperature. 
<div><br>
</div>
<div>Haifeng</div>
</div>
<br>
<div class="gmail_quote">
<div dir="ltr" class="gmail_attr">On Tue, Jun 25, 2019 at 3:49 PM Michael Elbaum <<a href="mailto:michael.elbaum@weizmann.ac.il" target="_blank">michael.elbaum@weizmann.ac.il</a>> wrote:<br>
</div>
<blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">
<div dir="auto">
<div style="direction:ltr;font-family:Tahoma;font-size:10pt">
<div>Regarding my earlier post about a side entry holder for autogrids, here's a simple hack. The autogrid cassette sits comfortably in the 626-70 holder tip with the c-clip facing upwards. The Gatan clip ring then fits in nicely upside down, like
 a top hat, and snaps into place with the autogrid trapped underneath. I tried this at room temperature and couldn't shake or tap it out. We tested in cryo and the grid remained vitrified. There's some restriction of the area accessible for tomography that
 might be remedied with a larger hole in the clip ring. <br>
</div>
<div><br>
</div>
<div>Try at your own risk, etc etc, but it seems to work.</div>
<div><br>
Michael</div>
<div><br>
</div>
<div><br>
</div>
<div style="font-family:"Times New Roman";font-size:16px">
<hr>
<div id="gmail-m_5148007033696049410gmail-m_-5647363986938848351gmail-m_6973634830519592625divRpF923910" style="direction:ltr">
<font size="2" face="Tahoma"><b>From:</b> 3dem [<a href="mailto:3dem-bounces@ncmir.ucsd.edu" target="_blank">3dem-bounces@ncmir.ucsd.edu</a>] on behalf of Wim Hagen [<a href="mailto:hagen@embl.de" target="_blank">hagen@embl.de</a>]<br>
<b>Sent:</b> Monday, June 17, 2019 19:16<br>
<b>To:</b> <a href="mailto:3dem@ncmir.ucsd.edu" target="_blank">
3dem@ncmir.ucsd.edu</a><br>
<b>Subject:</b> Re: [3dem] side entry holder for autogrids?<br>
</font><br>
</div>
<div></div>
<div>
<div dir="ltr"></div>
<div dir="ltr">Hi Michael,</div>
<div dir="ltr"><br>
</div>
<div dir="ltr">I’ve discussed this with Chris Booth from Gatan some time ago, a multiple cartridge side entry holder will for sure also help a lot of people with side-entry screening systems, preparing for later data collection  in central facilities.
 With other people’s ideas for cheap side-entry low-kv screening tools, this could be quite a market.</div>
<div dir="ltr"><br>
</div>
<div dir="ltr">Best,</div>
<div dir="ltr"><br>
</div>
<div dir="ltr">Wim Hagen</div>
<div dir="ltr">EMBL Heidelberg</div>
<div dir="ltr"><br>
On 17. Jun 2019, at 18:00, Michael Elbaum <<a href="mailto:michael.elbaum@weizmann.ac.il" target="_blank">michael.elbaum@weizmann.ac.il</a>> wrote:<br>
<br>
</div>
<blockquote type="cite">
<div dir="ltr">
<div style="direction:ltr;font-family:Tahoma;font-size:10pt">
<div>Hi all,    wondering if anyone has heard/thought/dreamed of a side entry holder for clipped grids? This would be very useful in mixed company (of microscopes, of course), and could enable analysis of grids post-tomography by non-standard methods
 such as EDS. Perhaps someone has experience in modifying a 626 tip for the purpose?</div>
<div>regards,</div>
<div>Michael <br>
</div>
</div>
</div>
</blockquote>
<blockquote type="cite">
<div dir="ltr"><span>_______________________________________________</span><br>
<span>3dem mailing list</span><br>
<span><a href="mailto:3dem@ncmir.ucsd.edu" target="_blank">3dem@ncmir.ucsd.edu</a></span><br>
<span><a href="https://mail.ncmir.ucsd.edu/mailman/listinfo/3dem" target="_blank">https://mail.ncmir.ucsd.edu/mailman/listinfo/3dem</a></span><br>
</div>
</blockquote>
</div>
</div>
</div>
</div>
_______________________________________________<br>
3dem mailing list<br>
<a href="mailto:3dem@ncmir.ucsd.edu" target="_blank">3dem@ncmir.ucsd.edu</a><br>
<a href="https://mail.ncmir.ucsd.edu/mailman/listinfo/3dem" rel="noreferrer" target="_blank">https://mail.ncmir.ucsd.edu/mailman/listinfo/3dem</a><br>
</blockquote>
</div>
_______________________________________________<br>
3dem mailing list<br>
<a href="mailto:3dem@ncmir.ucsd.edu" target="_blank">3dem@ncmir.ucsd.edu</a><br>
<a href="https://mail.ncmir.ucsd.edu/mailman/listinfo/3dem" target="_blank">https://mail.ncmir.ucsd.edu/mailman/listinfo/3dem</a><br>
</div>
</blockquote>
</div>
<br>
</div>
</div>
</blockquote>
<blockquote type="cite">
<div dir="ltr"><span>_______________________________________________</span><br>
<span>3dem mailing list</span><br>
<span><a href="mailto:3dem@ncmir.ucsd.edu" target="_blank">3dem@ncmir.ucsd.edu</a></span><br>
<span><a href="https://mail.ncmir.ucsd.edu/mailman/listinfo/3dem" target="_blank">https://mail.ncmir.ucsd.edu/mailman/listinfo/3dem</a></span><br>
</div>
</blockquote>
</div>

</blockquote></div>