<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=us-ascii">
<style type="text/css" style="display:none;"><!-- P {margin-top:0;margin-bottom:0;} --></style>
</head>
<body dir="ltr">
<div id="divtagdefaultwrapper" style="font-size:12pt;color:#000000;font-family:Calibri,Helvetica,sans-serif;" dir="ltr">
<p style="margin-top:0;margin-bottom:0">Stan,</p>
<p style="margin-top:0;margin-bottom:0">Pelco recently introduced a rubber protector for the jar, part no.
<span>91053</span>. Vlad Speransky mentioned this on the listserv a while ago; since adding it my users haven't chipped any jars (vs. !@#$ many jars before).</p>
<p style="margin-top:0;margin-bottom:0">Sometimes the easiGlow protocol terminates without venting all the way. Then the user should open the gas inlet via the manual control in the options menu.</p>
<p style="margin-top:0;margin-bottom:0"><br>
</p>
<p style="margin-top:0;margin-bottom:0">Kristin,</p>
<p style="margin-top:0;margin-bottom:0">We have an "all-in-one" sort of unit in addition to the easiGlow. The thing is that adding the glow discharge feature to the fancy unit cost us about the same as buying a stand-alone glow discharger!</p>
<p style="margin-top:0;margin-bottom:0">Also, if you anticipate doing controlled-atmosphere discharge, such as pentylamine, it is more cost-effective (and space-effective) to get a double-chamber unit upfront rather than having to get a second unit later. Corduan
and Pelco both offer a double-chamber and I bet others do as well.</p>
<p style="margin-top:0;margin-bottom:0"><br>
</p>
<p style="margin-top:0;margin-bottom:0">Cheers,</p>
<p style="margin-top:0;margin-bottom:0">Jason Kaelber</p>
<p style="margin-top:0;margin-bottom:0">Rutgers<br>
</p>
</div>
<hr style="display:inline-block;width:98%" tabindex="-1">
<div id="divRplyFwdMsg" dir="ltr"><font face="Calibri, sans-serif" style="font-size:11pt" color="#000000"><b>From:</b> 3dem <3dem-bounces@ncmir.ucsd.edu> on behalf of 3dem-request@ncmir.ucsd.edu <3dem-request@ncmir.ucsd.edu><br>
<b>Sent:</b> Friday, September 7, 2018 2:21:32 PM<br>
<b>To:</b> 3dem@ncmir.ucsd.edu<br>
<b>Subject:</b> 3dem Digest, Vol 133, Issue 16</font>
<div> </div>
</div>
<div class="BodyFragment"><font size="2"><span style="font-size:11pt;">
<div class="PlainText">Send 3dem mailing list submissions to<br>
3dem@ncmir.ucsd.edu<br>
<br>
To subscribe or unsubscribe via the World Wide Web, visit<br>
<a href="https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fmail.ncmir.ucsd.edu%2Fmailman%2Flistinfo%2F3dem&data=02%7C01%7Cjason.kaelber%40rutgers.edu%7Caa30920cf3944f59c03e08d614eed5f7%7Cb92d2b234d35447093ff69aca6632ffe%7C1%7C0%7C636719413399150766&sdata=2yAK%2BPun5ZKf%2B5FesXL3hCrwMutXe8iUIVXF8H8dLYE%3D&reserved=0">
https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fmail.ncmir.ucsd.edu%2Fmailman%2Flistinfo%2F3dem&data=02%7C01%7Cjason.kaelber%40rutgers.edu%7Caa30920cf3944f59c03e08d614eed5f7%7Cb92d2b234d35447093ff69aca6632ffe%7C1%7C0%7C636719413399150766&sdata=2yAK%2BPun5ZKf%2B5FesXL3hCrwMutXe8iUIVXF8H8dLYE%3D&reserved=0</a><br>
or, via email, send a message with subject or body 'help' to<br>
3dem-request@ncmir.ucsd.edu<br>
<br>
You can reach the person managing the list at<br>
3dem-owner@ncmir.ucsd.edu<br>
<br>
When replying, please edit your Subject line so it is more specific<br>
than "Re: Contents of 3dem digest..."<br>
<br>
<br>
Today's Topics:<br>
<br>
1. questions about carbon coaters /glow discharge (Parent, Kristin)<br>
2. Re: questions about carbon coaters /glow discharge<br>
(Stanislav Vitha)<br>
<br>
<br>
----------------------------------------------------------------------<br>
<br>
Message: 1<br>
Date: Fri, 7 Sep 2018 17:37:06 +0000<br>
From: "Parent, Kristin" <kparent@msu.edu><br>
To: "3dem@ncmir.ucsd.edu" <3dem@ncmir.ucsd.edu><br>
Subject: [3dem] questions about carbon coaters /glow discharge<br>
Message-ID: <498F1D10-1C94-4D86-A79E-39341A983BCC@msu.edu><br>
Content-Type: text/plain; charset="utf-8"<br>
<br>
Hello all,<br>
<br>
I was hoping some of you might share good/bad experiences with a carbon coater & glow discharge device? We are planning to purchase one to support our growing facility and I would love to hear this groups? experience.<br>
<br>
We have on hand a plasma cleaner that works really well, so what I am hoping for is ideally something to supplement our existing equipment (for those that prefer glow discharge) and also is capable of carbon coating.<br>
<br>
Thank you in advance,<br>
Kristin<br>
<br>
--<br>
Kristin N. Parent, Ph.D.<br>
J. K. Billman, Jr., M.D. Endowed Research Professor<br>
and Assistant Professor of Biochemistry & Molecular Biology<br>
Michigan State University<br>
603 Wilson Road<br>
East Lansing, MI 48824<br>
Office phone: (517) 432-8434<br>
<a href="https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fkparentlab.natsci.msu.edu%2F&data=02%7C01%7Cjason.kaelber%40rutgers.edu%7Caa30920cf3944f59c03e08d614eed5f7%7Cb92d2b234d35447093ff69aca6632ffe%7C1%7C0%7C636719413399150766&sdata=jv9pZzpVtqLeeDzLHHiyM5lSZ%2F%2Byi2AiGXeM2dSMoK8%3D&reserved=0">https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fkparentlab.natsci.msu.edu%2F&data=02%7C01%7Cjason.kaelber%40rutgers.edu%7Caa30920cf3944f59c03e08d614eed5f7%7Cb92d2b234d35447093ff69aca6632ffe%7C1%7C0%7C636719413399150766&sdata=jv9pZzpVtqLeeDzLHHiyM5lSZ%2F%2Byi2AiGXeM2dSMoK8%3D&reserved=0</a><br>
Twitter: @Phage4Lyfe<br>
<br>
<br>
-------------- next part --------------<br>
An HTML attachment was scrubbed...<br>
URL: <<a href="https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fmail.ncmir.ucsd.edu%2Fpipermail%2F3dem%2Fattachments%2F20180907%2F0dfb41d9%2Fattachment-0001.html&data=02%7C01%7Cjason.kaelber%40rutgers.edu%7Caa30920cf3944f59c03e08d614eed5f7%7Cb92d2b234d35447093ff69aca6632ffe%7C1%7C0%7C636719413399150766&sdata=vUnXTNRpNMnLxzDSk%2F3BTWkX%2BSnvHE7ERmN%2F1FyewCw%3D&reserved=0">https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fmail.ncmir.ucsd.edu%2Fpipermail%2F3dem%2Fattachments%2F20180907%2F0dfb41d9%2Fattachment-0001.html&data=02%7C01%7Cjason.kaelber%40rutgers.edu%7Caa30920cf3944f59c03e08d614eed5f7%7Cb92d2b234d35447093ff69aca6632ffe%7C1%7C0%7C636719413399150766&sdata=vUnXTNRpNMnLxzDSk%2F3BTWkX%2BSnvHE7ERmN%2F1FyewCw%3D&reserved=0</a>><br>
<br>
------------------------------<br>
<br>
Message: 2<br>
Date: Fri, 7 Sep 2018 18:21:22 +0000<br>
From: Stanislav Vitha <stanvitha@tamu.edu><br>
To: "'3dem@ncmir.ucsd.edu'" <3dem@ncmir.ucsd.edu><br>
Subject: Re: [3dem] questions about carbon coaters /glow discharge<br>
Message-ID: <63557b559b624891a06873ae6c3f9aab@tamu.edu><br>
Content-Type: text/plain; charset="utf-8"<br>
<br>
We have the Pelco EasiGlow glow discharge apparatus, separate from a Cressington carbon coater (with which I do not have experience).<br>
The EasiGlow has worked without problems for many years (9 years or more), and users love the easy operation, with a single button to push.<br>
<br>
The only issue is that some users are a bit impatient and try to yank off the bell jar before the vacuum is fully released and doing so chip the edge of the bell jar (which then does not seal).? Filling the chipped area with JB Weld and sanding it smooth fixed
it many times, but eventually we had to buy a new jar.<br>
<br>
Go Spartans!<br>
<br>
Regards,<br>
<br>
Stan<br>
<br>
Dr. Stanislav Vitha<br>
Research Scientist<br>
Microscopy and Imaging Center<br>
Texas A&M University<br>
301 Old Main Dr<br>
College Station, TX 77843-2257<br>
<br>
Office: ILSB Room 1131<br>
<<a href="https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fmicroscopy.tamu.edu%2F&data=02%7C01%7Cjason.kaelber%40rutgers.edu%7Caa30920cf3944f59c03e08d614eed5f7%7Cb92d2b234d35447093ff69aca6632ffe%7C1%7C0%7C636719413399150766&sdata=jFTp7GFvjt2Csuc9hRHebP5M%2FnzFPPUsjTzOxbWwH5o%3D&reserved=0">https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fmicroscopy.tamu.edu%2F&data=02%7C01%7Cjason.kaelber%40rutgers.edu%7Caa30920cf3944f59c03e08d614eed5f7%7Cb92d2b234d35447093ff69aca6632ffe%7C1%7C0%7C636719413399150766&sdata=jFTp7GFvjt2Csuc9hRHebP5M%2FnzFPPUsjTzOxbWwH5o%3D&reserved=0</a>>Tel.
979-845-1607<br>
<a href="https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fmicroscopy.tamu.edu&data=02%7C01%7Cjason.kaelber%40rutgers.edu%7Caa30920cf3944f59c03e08d614eed5f7%7Cb92d2b234d35447093ff69aca6632ffe%7C1%7C0%7C636719413399150766&sdata=3aTmoznJXV6M%2FA1JExtjkLU%2FSMrRU1Psfyk%2FLluQD8I%3D&reserved=0">https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fmicroscopy.tamu.edu&data=02%7C01%7Cjason.kaelber%40rutgers.edu%7Caa30920cf3944f59c03e08d614eed5f7%7Cb92d2b234d35447093ff69aca6632ffe%7C1%7C0%7C636719413399150766&sdata=3aTmoznJXV6M%2FA1JExtjkLU%2FSMrRU1Psfyk%2FLluQD8I%3D&reserved=0</a><br>
<br>
<br>
<br>
From: 3dem [<a href="mailto:3dem-bounces@ncmir.ucsd.edu">mailto:3dem-bounces@ncmir.ucsd.edu</a>] On Behalf Of Parent, Kristin<br>
Sent: Friday, September 07, 2018 12:37 PM<br>
To: 3dem@ncmir.ucsd.edu<br>
Subject: [3dem] questions about carbon coaters /glow discharge<br>
<br>
Hello all,<br>
<br>
I was hoping some of you might share good/bad experiences with a carbon coater & glow discharge device? We are planning to purchase one to support our growing facility and I would love to hear this groups? experience.<br>
<br>
We have on hand a plasma cleaner that works really well, so what I am hoping for is ideally something to supplement our existing equipment (for those that prefer glow discharge) and also is capable of carbon coating.<br>
<br>
Thank you in advance,<br>
Kristin<br>
<br>
--<br>
Kristin N. Parent, Ph.D.<br>
J. K. Billman, Jr., M.D. Endowed Research Professor<br>
and Assistant Professor of Biochemistry & Molecular Biology<br>
Michigan State University<br>
603 Wilson Road<br>
East Lansing, MI 48824<br>
Office phone: (517) 432-8434<br>
<a href="https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fkparentlab.natsci.msu.edu%2F&data=02%7C01%7Cjason.kaelber%40rutgers.edu%7Caa30920cf3944f59c03e08d614eed5f7%7Cb92d2b234d35447093ff69aca6632ffe%7C1%7C0%7C636719413399150766&sdata=jv9pZzpVtqLeeDzLHHiyM5lSZ%2F%2Byi2AiGXeM2dSMoK8%3D&reserved=0<https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Furldefense.proofpoint.com%2Fv2%2Furl%3Fu%3Dhttps-3A__kparentlab.natsci.msu.edu_%26d%3DDwMGaQ%26c%3DODFT-G5SujMiGrKuoJJjVg%26r%3DtE-7MR_zhznDCk27UIOmF3KCvigbMQUT9WjrucIisxY%26m%3DAeieE4STXjyYpq7quSIuHQT-42yy1OnpTXbLyBrQbUs%26s%3DmsFGECctI8t4RODwkc4-PTKfaS1Yiybkn57L725GuwU%26e&data=02%7C01%7Cjason.kaelber%40rutgers.edu%7Caa30920cf3944f59c03e08d614eed5f7%7Cb92d2b234d35447093ff69aca6632ffe%7C1%7C0%7C636719413399150766&sdata=d6DOiT6c21jPE54pUAuwfh0edjCKA8bKxuNeQbpWXUE%3D&reserved=0=">https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fkparentlab.natsci.msu.edu%2F&data=02%7C01%7Cjason.kaelber%40rutgers.edu%7Caa30920cf3944f59c03e08d614eed5f7%7Cb92d2b234d35447093ff69aca6632ffe%7C1%7C0%7C636719413399150766&sdata=jv9pZzpVtqLeeDzLHHiyM5lSZ%2F%2Byi2AiGXeM2dSMoK8%3D&reserved=0<https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Furldefense.proofpoint.com%2Fv2%2Furl%3Fu%3Dhttps-3A__kparentlab.natsci.msu.edu_%26d%3DDwMGaQ%26c%3DODFT-G5SujMiGrKuoJJjVg%26r%3DtE-7MR_zhznDCk27UIOmF3KCvigbMQUT9WjrucIisxY%26m%3DAeieE4STXjyYpq7quSIuHQT-42yy1OnpTXbLyBrQbUs%26s%3DmsFGECctI8t4RODwkc4-PTKfaS1Yiybkn57L725GuwU%26e&data=02%7C01%7Cjason.kaelber%40rutgers.edu%7Caa30920cf3944f59c03e08d614eed5f7%7Cb92d2b234d35447093ff69aca6632ffe%7C1%7C0%7C636719413399150766&sdata=d6DOiT6c21jPE54pUAuwfh0edjCKA8bKxuNeQbpWXUE%3D&reserved=0=</a>><br>
Twitter: @Phage4Lyfe<br>
<br>
<br>
-------------- next part --------------<br>
An HTML attachment was scrubbed...<br>
URL: <<a href="https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fmail.ncmir.ucsd.edu%2Fpipermail%2F3dem%2Fattachments%2F20180907%2Fe58f9617%2Fattachment.html&data=02%7C01%7Cjason.kaelber%40rutgers.edu%7Caa30920cf3944f59c03e08d614eed5f7%7Cb92d2b234d35447093ff69aca6632ffe%7C1%7C0%7C636719413399150766&sdata=6cipHwMJrBMxw5ZGj7UbYuUJUDf5%2Bsn8rp6T%2Bd4hEqw%3D&reserved=0">https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fmail.ncmir.ucsd.edu%2Fpipermail%2F3dem%2Fattachments%2F20180907%2Fe58f9617%2Fattachment.html&data=02%7C01%7Cjason.kaelber%40rutgers.edu%7Caa30920cf3944f59c03e08d614eed5f7%7Cb92d2b234d35447093ff69aca6632ffe%7C1%7C0%7C636719413399150766&sdata=6cipHwMJrBMxw5ZGj7UbYuUJUDf5%2Bsn8rp6T%2Bd4hEqw%3D&reserved=0</a>><br>
<br>
------------------------------<br>
<br>
Subject: Digest Footer<br>
<br>
_______________________________________________<br>
3dem mailing list<br>
3dem@ncmir.ucsd.edu<br>
<a href="https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fmail.ncmir.ucsd.edu%2Fmailman%2Flistinfo%2F3dem&data=02%7C01%7Cjason.kaelber%40rutgers.edu%7Caa30920cf3944f59c03e08d614eed5f7%7Cb92d2b234d35447093ff69aca6632ffe%7C1%7C0%7C636719413399150766&sdata=2yAK%2BPun5ZKf%2B5FesXL3hCrwMutXe8iUIVXF8H8dLYE%3D&reserved=0">https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fmail.ncmir.ucsd.edu%2Fmailman%2Flistinfo%2F3dem&data=02%7C01%7Cjason.kaelber%40rutgers.edu%7Caa30920cf3944f59c03e08d614eed5f7%7Cb92d2b234d35447093ff69aca6632ffe%7C1%7C0%7C636719413399150766&sdata=2yAK%2BPun5ZKf%2B5FesXL3hCrwMutXe8iUIVXF8H8dLYE%3D&reserved=0</a><br>
<br>
<br>
------------------------------<br>
<br>
End of 3dem Digest, Vol 133, Issue 16<br>
*************************************<br>
</div>
</span></font></div>
</body>
</html>