<div dir="ltr"><div><div><div><div>Hello 3dem members,<br>I have had trouble with bending grids when I try to grow mammalian cells on them.  To combat this problem, I made some grid holders with our 3D printer. A full description can be found here<br><br><a href="https://techtransfer.cancer.gov/availabletechnologies/e-243-2016">https://techtransfer.cancer.gov/availabletechnologies/e-243-2016</a><br><br></div>and some images are attached.  The good thing about them is that they work very well and make it easier to pick up grids without bending them, the downside is that since the grids are raised above the glass to allow tweezers to slide under them, it is more difficult to get good high-resolution fluorescent images.  The smaller ones were designed for glass-bottomed Mattek dishes with 20mm glass diameter<br><br><a href="https://www.mattek.com/store/p35g-1-0-20-c-case/">https://www.mattek.com/store/p35g-1-0-20-c-case/</a><br><br></div><div>and the larger one fits in either a Mattek 35mm dish or a 6 well plate.<br></div><div><br></div>If anyone is interested in trying these, I would be happy to send the .stl files so you can 3D print your own with your choice of material.  I can also send a printed out version of either one in PLA.  Alternatively, I can send the Blender files if anyone would like to make any adjustments to these.<br></div>Regards,<br></div>Giovanna Grandinetti<br><div><div><div><br><br></div></div></div></div>